Elevate Your EMI Pre-Compliance Testing with Siglent Spectrum Analyzers
We're excited to further celebrate Siglent Month with a promotion aimed at enhancing your EMI pre-compliance testing capabilities. For a limited period, enjoy special discounts on Siglent's SSA5000A, SSA3000X, SSA3000X Plus, SSA3000X-R, and SVA1000X series spectrum analyzers, now with the essential EMI test option included.
Promotion Details
- Purchase a new SIGLENT spectrum analyzer and SRF5030T near-field probe kit* to receive a free EMI option activation license!
- Products Covered:
Siglent SSA5000A, SSA3000X, SSA3000X Plus, SSA3000X-R, and SVA1000X Series Spectrum Analyzers
SRF5030T near-field probe kit： H20, H10, H5, E5
EMI measurement kit (FOR FREE):
EMI-SSA3000X for SSA3000X (worth $559),
SSA3000XP-EMI for SSA3000X Plus (worth $559) (Filter Bandwidth: 200/9k/120k/1M)
SSA3000XR-EMI for SSA3000X-R (worth $799) (EMI Filter and Quasi Peak Detector,EMI Receiver Mode in EasySpectrum Software)
SVA1000X-EMI for SVA1000X (worth $449)
SSA5000-EMI for SSA5000A (worth $850)
T&C:
*Promotion only on models listed.
*Promotion only valid in June 2024.
*This promotion is only available in Asia, Africa and Latin America Area.
Introducing the SRF5030T Near Field Probe Kit
The SRF5030T near field probe set, including magnetic (H) and electric (E) field probes, is used for pre-compliance EMC measurements. These probes identify potential interference sources in electronic assemblies. Like wide bandwidth antennas, they detect emissions from various components and can pinpoint emission sources when connected to a spectrum analyzer. They can conduct RF immunity tests, assist in repair or debugging by measuring RF signal levels, and non-invasively measure RF building blocks such as modulators or oscillators.
SRF5030T Near Field Probe Kit Features:
Four Probes: Includes 1 E-field and 3 H-field probes for comprehensive testing.
Wide Frequency Range: Covers 300 kHz-3GHz, can be used well beyond 6 GHz
Resolution: 5mm, 10mm, 20mm
Distinguished within 10 cm range of the magnetic field
Insensitive to the human hand with shielded loops to avoid picking up common mode noise
SMB connector to avoid twisting the RF cable when scanning DUTs
Importance of EMI Measurement Kits for Spectrum Analyzers
Electromagnetic Interference (EMI) measurement kits are crucial for spectrum analyzers because they enable the detection, identification, and analysis of unwanted electromagnetic emissions that can cause interference with electronic devices and systems. Here’s why they are important:
Compliance Testing
Regulatory Requirements:
Many industries must comply with stringent electromagnetic compatibility (EMC) regulations to ensure their products do not emit excessive electromagnetic interference. EMI measurement kits help manufacturers test their products against these standards.
Pre-Compliance Testing:
Before a product goes through formal certification, EMI measurement kits allow for pre-compliance testing to identify and mitigate potential EMI issues, saving time and resources in the long run.
Interference Detection
Troubleshooting:
EMI measurement kits help in identifying sources of electromagnetic interference within a device or system, enabling engineers to troubleshoot and resolve issues effectively.
Quality Assurance:
Ensuring that devices do not emit or are not susceptible to EMI is critical for maintaining product quality and reliability.
Design Validation
Prototyping and Development
During the design phase, engineers use EMI measurement kits to test and validate their designs, ensuring that EMI levels are within acceptable limits.
Component Testing:
Individual components can be tested for EMI to ensure they do not contribute to overall system interference.
Applications with Near Field Probe Kits
When used together with near field probe kits, EMI measurement kits and spectrum analyzers can perform a variety of important applications:
Source Localization:
- Pinpointing EMI Sources: Near field probes can be used to scan circuit boards and components to locate the exact source of unwanted emissions. This is essential for mitigating EMI at its origin.
- Detailed Analysis: By using different probes, engineers can analyze emissions from specific areas or components, providing a detailed understanding of where and why emissions occur.
Component and PCB Testing:
- Surface Scanning: Near field probes can scan the surface of a PCB or individual components to identify areas emitting high levels of EMI.
- Design Iteration: This allows for iterative design improvements, where engineers can make adjustments and retest to ensure emissions are reduced.
EMI Mitigation:
- Effective Shielding: Near field probes help in testing the effectiveness of shielding efforts and other EMI mitigation techniques.
- Filter Design: Engineers can design and test filters to reduce EMI, ensuring that these filters effectively target the identified sources of interference.
Field Testing and Maintenance
- On-Site Diagnostics: Near field probes are portable and can be used in the field to diagnose EMI issues in installed systems and equipment, making them valuable for maintenance and troubleshooting.
- Repair and Debugging: In repair scenarios, near field probes help technicians identify faulty components or sections of a circuit that may be causing EMI issues.
Non-Invasive Testing:
- Contactless Measurements: Near field probes allow for non-invasive testing of RF signal levels, making it possible to measure emissions without physically altering or damaging the device under test.
- Sensitive Areas: This is particularly useful in sensitive areas of a circuit where direct probing might be impractical or risky.
Take Advantage of This Limited-Time Offer!
Don't miss this exclusive opportunity to enhance your EMI testing capabilities with Siglent's advanced spectrum analyzers and the SRF5030T near field probe kit. With the free EMI test option and significant discounts, now is the perfect time to upgrade your testing setup.**Act Now!** Contact ESE today to take advantage of this limited-time promotion. Visit our website or email us at info.ets@ese.com.hk for more information and to place your order.
ESE Electrical Testing Systems
Leading distributor of electronic testing systems in Asia with 40+ years professional experience.
