Name: KIKUSUI PBZ
Brand: ESE - Electronic Testing Systems
SKU: NO1536

Features

Waveform Generation

Built-in function generator for customizable waveform generation! In addition to basic sine, square and triangular waveforms, the PBZ allows the operator to customize up to 16 user-defined waveforms with the internal function generator. Amplitude, frequency, start phase, frequency sweep and square wave duty can be programmed as needed. 16 user-defined waveforms can be freely edited and registered to the PBZ internal memory. The sequence feature (see P6) allows for each step in an individual waveform to be customized in detail for a maximum of 1024 steps among 16 programs. *Waveform editing requires proprietary software (Wavy for PBZ).

Sequence Feature

Sequence customization for convenient waveform generation! The basic sine, triangular and square waveforms (as well as the 16 user-defined waveforms) can be programmed per sequence step, allowing for easy creation of complex sequences. Sequences are composed of up to 1024 steps, which can be allocated among a maximum of 16 programs. The script function allows for multiple programs to be c ombined and executed as needed. As shown on the right, Program 1 uses 8 steps, allow-ing for 1016 steps to be allocated among the remaining 15 programs. (1024 – 8 = 1016 steps)The script function allows the operator to specify the sequence and number of repetitions for set programs. A maximum of 50 rows can be assigned to 1 script for both CV and CC mode.

Synchronized Operation

Seamless sequence execution with no deviation between synchronized units!
This feature allows the user to synchronize the output of multiple PBZ units when executing a sequence, preventing any deviations from occurring even during a long sequence. *Excluding start-up delay of up to 1 μs

Multichannel voltage variation test example
Power for automotive vehicles is supplied by the battery, but the power is activated by multiple internal electronic components (+B→ACC→IG) turning ON/OFF in a specific order. There are an extremely large number of electronic components that can cause instability within the automobile, including engine start-up and electrical circuit chattering. Therefore, problems caused by this instability such as power interruptions and fluctuations can be planned for and avoided by performing rigorous voltage variation tests on all channels for automotive electronic components.

Car navigation system
CH1: +B LINE
Power continuously supplied by the battery is distributed to components such as clocks and memory devices.
CH2: ACC LINE
The power supply for car navigation systems are turned ON via the ignition switch’s ACC contact. After the switch is acti-vated, real-time navigation, radio, etc. become possible.
CH3: ILL LINE
+Backup power supply line (ILL) that directly pulls up +B, IG, and ACC.

Parallel Operation

Easily increase capacity!
This feature allows the user to increase the output current by connecting multiple units in parallel. This setup can easily be completed with 2 identical models and the optional parallel operation kit. For systems that require more than 3 units, please refer to the PBZ-SR Series. For systems that require more than 6 units, please contact your local Kikusui distributor. (Standard models)

Parallel operation kit (option)
The optional accessory kit for connecting 2 PBZ units in parallel (same model). Please select the following kit that best fits your testing requirements.
*Bracket is not included for PK02-PBZ and PK03-PBZ

PK01-PBZ
For Desktop use
Contents: Bracket, Insulating sheet, OUTPUT terminal connection bar, Parallel output terminal cover, Bracket screws (M4-8L), Spacer, Load wire screw (M5-10L), Parallel operation signal cable

PK02-PBZ (For EIA inch size)
For Rack-mounted system
Contents: Insulating sheet, OUTPUT terminal connection bar, Load wire screw (M5-10L), Parallel operation signal cable

PK03-PBZ (For JIS metric size)
For Rack-mounted system
Contents: Insulating sheet, OUTPUT terminal connection bar, Load wire screw (M5-10L), Parallel operation signal cable

High-Speed Response: 100kHz1/150kHz2 (CV mode)

Rise time example when 3.5 μs response is set
Rise time example when 3.5 μs response is set
100 kHz/150 kHz frequency specifications (CV). The excellent waveform quality combined with the ultra-fast rise/fall time of 3.5 μs allow the PBZ to reproduce a wide variety of waveforms of the highest quality.

*1 100 kHz for standard models (PBZ20-20, 40-10, 60-6.7, 80-5)
*2 150kHz for “A” models (PBZ20-20A)

Model

Model	DC Voltage	DC Current	DC Power	Height	Power Connection	Input Power
PBZ20-20A	±20 V	±20 A	400 W	128mm	100 Vac to 240 Vac, 50 Hz to 60 Hz	≤ 900 VA
PBZ20-20	±20 V	±20 A	400 W	128mm	100 Vac to 240 Vac, 50 Hz to 60 Hz	≤ 900 VA
PBZ40-10	±40 V	±10 A	400 W	128mm	100 Vac to 240 Vac, 50 Hz to 60 Hz	≤ 900 VA
PBZ60-6.7	±60 V	±6.7 A	402 W	128mm	100 Vac to 240 Vac, 50 Hz to 60 Hz	≤ 900 VA
PBZ80-5	±80 V	±5 A	400 W	128mm	100 Vac to 240 Vac, 50 Hz to 60 Hz	≤ 900 VA
PBZ20-60 SR	± 20 V	± 60 A	1200 W	579.4mm	200 Vac to 240 Vac, single phase	≤ 2700 VA
PBZ20-80 SR	± 20 V	± 80 A	1600 W	712.1mm	200 Vac to 240 Vac, single phase	≤ 3600 VA
PBZ20-100 SR	± 20 V	± 100 A	2000 W	844.8mm	200 Vac to 240 Vac, single phase	≤ 4500 VA
PBZ40-30 SR	± 40 V	± 30 A	1200 W	579.4mm	200 Vac to 240 Vac, single phase	≤ 2700 VA
PBZ40-40 SR	± 40 V	± 40 A	1600 W	712.1mm	200 Vac to 240 Vac, single phase	≤ 3600 VA
PBZ40-50 SR	± 40 V	± 50 A	2000 W	844.8mm	200 Vac to 240 Vac, single phase	≤ 4500 VA
PBZ60-20.1 SR	± 60 V	± 20.1 A	1206 W	579.4mm	200 Vac to 240 Vac, single phase	≤ 2700 VA
PBZ60-26.8 SR	± 60 V	± 26.8 A	1608 W	712.1mm	200 Vac to 240 Vac, single phase	≤ 3600 VA
PBZ60-33.5 SR	± 60 V	± 33.5 A	2010 W	844.8mm	200 Vac to 240 Vac, single phase	≤ 4500 VA
PBZ80-15 SR	± 80 V	± 15 A	1200 W	579.4mm	200 Vac to 240 Vac, single phase	≤ 2700 VA
PBZ80-20 SR	± 80 V	± 20 A	1600 W	712.1mm	200 Vac to 240 Vac, single phase	≤ 3600 VA
PBZ80-25 SR	± 80 V	± 25 A	2000 W	844.8mm	200 Vac to 240 Vac, single phase	≤ 4500 VA
PBZ20-120 BP	± 20 V	± 120 A	2400 W	1350mm	200 Vac to 240 Vac, single phase	≤ 5400 VA
PBZ20-140 BP	± 20 V	±140 A	2800 W	1350mm	200 Vac to 240 Vac, single phase	≤ 6300 VA
PBZ20-160 BP	± 20 V	±160 A	3200 W	1350mm	200 Vac to 240 Vac, single phase	≤ 7200 VA
PBZ20-180 BP	± 20 V	± 180 A	3600 W	1750mm	200 Vac to 240 Vac, single phase	≤ 8100 VA
PBZ20-200 BP	± 20 V	± 200 A	4000 W	1750mm	200 Vac, single phase	≤ 9000 VA
PBZ40-60 BP	± 40 V	± 60 A	2400 W	1350mm	200 Vac to 240 Vac, single phase	≤ 5400 VA
PBZ40-70 BP	± 40 V	±70 A	2800 W	1350mm	200 Vac to 240 Vac, single phase	≤ 6300 VA
PBZ40-80 BP	± 40 V	±80 A	3200 W	1350mm	200 Vac to 240 Vac, single phase	≤ 7200 VA
PBZ40-90 BP	± 40 V	± 90 A	3600 W	1750mm	200 Vac to 240 Vac, single phase	≤ 8100 VA
PBZ40-100 BP	± 40 V	± 100 A	4000 W	1750mm	200 Vac, single phase	≤ 9000 VA

SLIDE TO VIEW MORE

Series models

PBZ Series

PBZ SR Series

PBZ BP Series

Download

Datasheet

Inquiry list(0)

Key Specifications