1 /
2
Ametek NSG435
Description：
Key Specifications
TYPE OF WAVEFORM
ESDOUTPUT RANGE
200V to 16.5kVSTANDARD COMPLIANT
IEC 61000-4-2Category
Features
01
True air-discharge breakdown
NSG 435 measures and displays true air breakdown voltages. It also detects real or valid air-discharges,
thereby avoiding misleading discharge counts. This is especially important during long term tests and remote test setups.
02
Pre-programmed IEC/EN 61000-4-2 test settings
A range of interchangeable discharge networks is available, including EN, ANSI-IEEE, and ISO. The unit
comes with a standard 150 pF/330 Ω discharge network for tests to IEC/EN 61000-4-2.
03
Comfortable use and convenient
Comfortable use and convenient
operation
NSG 435 has its own internal, battery operated high voltage generator. In addition to the pre-programmed, standard IEC pulses, the user can create custom tests using single or repetitive discharges with selectable rates and manual or automatic polarity switching.
Model
| Model | Pulse network | Discharge Voltage | Discharge tips | Charging Voltage Measurement |
Discharge Detection | Holding Time | Polarity | Operating modes |
|---|---|---|---|---|---|---|---|---|
| NSG435 | Network 150 pF/330 Ω as per IEC/EN 61000-4-2 (included) Range of R/C networks for other standards: R = 0 Ω to 10 kΩ; C = 60 to 500 pF |
Air-discharge: 200 V to 16.5 kV (in 100 V steps); Contact-discharge: 200 V to 9 kV (in 100 V steps) |
Ball and point as per IEC | kV, accuracy better than ±5% (stabilized); measurement and display of true air flashover voltage |
Indicated by an oval around the kV symbol, also acoustically in the 'Single' operating mode (air-discharge only) |
>5 s (charging voltage ... ±5%) | Positive/negative/ automatic change |
Single/repetitive = pulse counter: 0 to 9999, preselect counter 0 to 9999 Repetition: 0.5/1/5/10/20 or 2 5 Hz (air); 0.5/1/5 or 10 Hz (contact); continuous operation |
SLIDE TO VIEW MORESeries models
NSG435
