Name: YOKOGAWA DL950
Brand: ESE - Electronic Testing Systems
SKU: NO935

Features

New high-speed module and 10 Gbps Ethernet

T200 MS/s 14 Bit Isolation Module
Accurately captures switching waveforms of inverters and fastmoving noises around the power supply.

Isolated input of up to 1000 V
ADC resolution 14 bit
Wide band of 40 MHz
Up to 20 seconds of continuous acquisition

10 GE data transfer (/C60 option)
Using 10 Gbps Ethernet, up to 20 MS/s of data can be stored in real time on a PC. An SFP+ module, a fiber optic cord, and the PC software IS8000 are used for data transfer. *Please use a commercially available SFP+ module and a 10 GE fiber optic cord.When transferring files, high speed transfer is not possible.

8 G points large memory (/M2 option)

With up to 8 G points of memory and 20 seconds of continuous capturing, even at 200 MS/s, no signal changes are missed. *Up to 4 G points of memory is allocated per channel.

SSD recording (/ST1 or /ST2 option)

The 512 GB internal SSD can record for long periods of time at up to 2 MS/s. Waveforms from dual capture can also be recorded, which is useful for in-vehicle endurance testing and capturing rare spontaneous events.

Flash acquisition (/ST2 option)

Long time recording at up to 20 MS/s, which is 100 times faster than the previous model, is available. You can capture data anywhere you cannot bring a PC such as on-vehicle or field testing. The flash memory is non-volatile, so the captured data stays in the instrument even after turning off the power. Data can later be transfered to a PC.
Deletion of the recorded data on the flash memory is not done for each recorded data but for all the data at once.
When transferring recorded data to a PC, please use the IS8000 or re-save the data in WDF format.

Model

Model	Channels	Bandwidth	Sampling Rate	Number of modules	Memory	Measurement type	Power
DL950	32 channels (when 4-CH modules are used in all slots) 128 channels (when 16 CH temperature/voltage modules are used in all slots)	40 MHz Max	10 S/s to 200 MS/s	8	Standard: 1 Gpoint (up to 500 Mpoints per channel) /M1 option: 4 Gpoints (up to 2 Gpoints per channel) /M2 option: 8 Gpoints (up to 4 Gpoints per channel)	Voltage, Current, Temperature, Strain, Acceleration, Frequency, Logic, CAN, LIN, CAN FD, SENT	100 to 240 V AC
720212	2	40 MHz	200 MS/s	N/A	N/A	Analog Voltage; High speed, high voltage, isolated	N/A
720211	2	20 MHz	100 MS/s	N/A	N/A	Analog Voltage; High speed, high voltage, isolated	N/A
720250	2	3 MHz	10 MS/s	N/A	N/A	Analog Voltage; High noise immunity	N/A
701251	2	300 kHz	1 MS/s	N/A	N/A	Analog Voltage; High sensitivity range (1 mV/div), low noise (±100 µVtyp.), and high noise immunity	N/A
720256	4	3 MHz	10 MS/s	N/A	N/A	Analog Voltage; 4 CH BNC input low noise, high noise immunity	N/A
720254	4	300 kHz	1 MS/s	N/A	N/A	Analog Voltage; 4 CH BNC inputlow noise, high noise immunity	N/A
701255	2	3 MHz	10 MS/s	N/A	N/A	Analog Voltage; High speed, non-isolated	N/A
720268	2	300 kHz	1 MS/s	N/A	N/A	Analog Voltage; With AAF, RMS, and high noise immunity	N/A
720220	16	5 kHz	200 kS/s	N/A	N/A	Analog Voltage; 16 CH voltage measurement (Scan-type)	N/A
701261	2	40 kHz (Voltage), 100 Hz (Temperature)	100 kS/s (Voltage), 500 S/s (Temperature)	N/A	N/A	Analog Voltage & Temperature; Thermocouple (K, E, J, T, L, U, N, R, S, B, W, KP/AuFe)	N/A
701262	2	40 kHz (Voltage), 100 Hz (Temperature)	100 kS/s (Voltage), 500 S/s (Temperature)	N/A	N/A	Analog Voltage & Temperature; Thermocouple (K, E, J, T, L, U, N, R, S, B, W, KP/AuFe), with AAF	N/A
701265	2	100 Hz	500 S/s (Voltage), 500 S/s (Temperature)	N/A	N/A	Analog Voltage & Temperature; Thermocouple (K, E, J, T, L, U, N, R, S, B, W, KP/AuFe), high sensitivity range (0.1 mV/div)	N/A
720266	2	15 Hz	125 S/s (Voltage), 125 S/s (Temperature)	N/A	N/A	Analog Voltage & Temperature; Thermocouple (K, E, J, T, L, U, N, R, S, B, W, KP/AuFe), high sensitivity range (0.1 mV/div), Low noise	N/A
720221	16	600 Hz	10 S/s	N/A	N/A	Analog Voltage & Temperature; 16 CH voltage or temperature measurement (scan method) Thermocouple (K, E, J, T, L, U, N, R, S, B, W, KP/AuFe)	N/A
701270	2	20 kHz	100 kS/s	N/A	N/A	Strain; Supports strain NDIS, 2, 5, 10 V built-in bridge power supply	N/A
701271	2	20 kHz	100 kS/s	N/A	N/A	Strain; Supports strain DSUB, 2, 5, 10 V built-in bridge power supply, and shunt CAL	N/A
701275	2	40 kHz	100 kS/s	N/A	N/A	Analog Voltage, Acceleration; Built-in anti-aliasing filter, Supports built-in amp type acceleration sensors (4 mA/22 V)	N/A
720281	2	resolution 625 ps	1 MS/s	N/A	N/A	Frequency; Measurement frequency of 0.01 Hz to 500 kHz, Measured parameters (frequency, RPMs, RPSs, period, duty cycle, power supply frequency, pulse width, pulse integration, and velocity)	N/A
720230	8bit x 2	N/A	10 MS/s	N/A	N/A	Logic; (8 bit/port) × 2, compatible with four types of logic probe (sold separately)	N/A
720242	60 signal x 2	N/A	100 kS/s	N/A	N/A	CAN/ CAN FD; CAN/CAN FD port × 2, extraction of up to 32-bit data	N/A
720241	60 signal x 2	N/A	100 kS/s	N/A	N/A	CAN, LIN; CAN port × 1 (CAN FD is not supported), LIN port × 1	N/A
720243	11 data x 2	N/A	100 kS/s	N/A	N/A	SENT; Supported protocol: SAE J2716	N/A